Fit icon

Generic product

NAC Tools Brake - Clutch Bleeding Tool

SKU: M9547289


$19.95

or 4 fortnightly payments of $4.99 with


Flat fee shipping!
Overnight courier just $5
*Conditions Apply

Order before 3.30pm,
we ship today
*Conditions Apply

Brake/Clutch bleeding tool from NAC Tools.

The easiest and most effective way to bleed your brakes or clutch is to reverse bleed the system. Since air always rises, it is more effective to push the old fluid and trapped air from your calipers at the bottom to your master cylinder at the top. Fasten a short length of hose to a syringe and fill it with fresh brake fluid. Brake fluid can damage plastic and paint so wrap the brake reservoir and bleeder with a towel. Brake fluid is also toxic so wear gloves when you work with it. Hold the syringe upside down so any trapped air will flow upwards toward the plunger and away from the hose. Open the brake bleeder and push the fresh fluid into your caliper until you see it come out in the master cylinder.

If your brakes still feel spongy after bleeding you should check the key areas for problems. Air frequently gets trapped in and around the banjo bolts, so simply loosen the bolts to release air pockets and re-bleed as necessary. Make sure the banjo bolt washers are not leaking. Check for any leaks along your brake lines. Often the seals on your master cylinder piston will get worn out or damaged and need to be replaced. The same is true for the seals around the pistons in your caliper. Sometimes, simply pumping the lever a good number of times will restore the positive feel.

 

Image is generic and may differ slightly to part supplied.


 

 

 

 

(M9547289)

This is a generic product which is suitable for many motorbike models.

Please refer to the product description and your manufacturer's instruction manual to determine whether this product is suitable for your bike or not.

SKU M9547289
Brand NAC Tools
Loading...

Be The First To Review This Product!

Help other MotoXparts users shop smarter by writing reviews for products you have purchased.

Write a product review

Others Also Bought

NAC Tools Fork Seal Driver 46mm-48mm
M9513424

NAC Tools Fork Seal Driver 46mm-48mm

$59.95

Hardline Hour Meter for Petrol Engines
HR-8063-2

Hardline Hour Meter for Petrol Engines

$59.95

More From This Category

Sunline Grip Glue
M9522119

Sunline Grip Glue

$3.95

NAC Tools Tyre Levers - 2Pack
M9511737

NAC Tools Tyre Levers - 2Pack

$22.95

MX Pro Tie Downs Pair - SureLock Wide-Boy
M9512813

MX Pro Tie Downs Pair - SureLock Wide-Boy

$37.95

NAC Tools Flywheel Puller M27 x 1.0 L.H
M9511141A

NAC Tools Flywheel Puller M27 x 1.0 L.H

$24.95

Fuel - Oil Measuring Jug - NAC Tools
M9522813

Fuel - Oil Measuring Jug - NAC Tools

$12.95

MX Pro Chain Breaker/Rivet/Cam Tool
M9511112H

MX Pro Chain Breaker/Rivet/Cam Tool

$99.95