Hotrods Yamaha WR250F 01-02 YZ250F 01-02 Conrod Kit

SKU: HR8618


NZ $369.95

or 4 fortnightly payments of NZ $92.49 with


Flat fee shipping!
Overnight courier just NZ $5.00
*Conditions Apply

Order before 3.30pm,
we ship today
*Conditions Apply

One single connecting rod is where it all began for Hot Rods and now, with almost two decades of experience, continuously improved designs and an ever-expanding line of applications, Hot Rods has continued to be, not only “The Original” aftermarket replacement rod, but the best aftermarket replacement rod.

All of Hot Rods replacement rods are created from 8620 case hardened steel. But, in addition to that, they also undergo a special forging process which helps to improve grain flow as well as dimensional consistency — and that means a rod of uncompromising strength.

To improve fatigue durability, all Hot Rods rods are shot-peened. This process, utilizing a stainless steel shot, helps to remove stress risers and creates smoothly blended radiuses. 
In the end, Hot Rods connecting rod is one of the most durable rods that enthusiasts and engine builders can buy.

However, a rod is only as good as its supporting parts and that’s why a Hot Rods kit features only the most advanced and durable bearings. Case hardened and silver coated, the bearings are just as tough and reliable as the rods.
Hot Rods crankpins are subjected to the same rigorous standards as the rods and bearings. Each crankpin is created from hot-rolled ASTM 4115 steel and case-hardened to a level of 58–62 Rc.

FEATURES

  • Double-honed bearing surfaces to provide a reliable, high RPM rod
  • Double-drilled small ends for increased wrist pin lubrication
  • Bronze bushings in the small end of all four-stroke rods to maximize durability under high-loads and prevent galling
  • Specially designed vent slots in the large end of all two-stroke rods for improved lubrication
  • Side scalloping on large end to minimise high RPM rod distortion
  • Image is generic and may differ slightly to part supplied.

(HR8618)

SKU HR8618
Brand Hot Rods
Loading...

Be The First To Review This Product!

Help other MotoXparts users shop smarter by writing reviews for products you have purchased.

Write a product review

We Also Recommend

MotoXparts Crank Rebuild Service
CRANK

MotoXparts Crank Rebuild Service

NZ $79.00

NAC Tools Crankcase Splitter
M9538113

NAC Tools Crankcase Splitter

NZ $159.95

You May Also Like

MotoXparts Crank Rebuild Service
CRANK

MotoXparts Crank Rebuild Service

NZ $79.00

NAC Tools Crankcase Splitter
M9538113

NAC Tools Crankcase Splitter

NZ $159.95

Others Also Bought

MX Pro KTM 125-200 Orange Clutch Reservoir Cover
M11554718

MX Pro KTM 125-200 Orange Clutch Reservoir Cover

NZ $29.95

Arrowhead Husqvarna TE250-300 KTM 200-300EXC/XC 410W Starter Motor
SMU0525

Arrowhead Husqvarna TE250-300 KTM 200-300EXC/XC 410W Starter Motor

NZ $279.95

More From This Category

Crankworx Honda CR80 90-02 CR85 03-07 Conrod Kit
CRD30013

Crankworx Honda CR80 90-02 CR85 03-07 Conrod Kit

NZ $129.95

Crankworx Husqvarna TC85 18-25 KTM 85SX 18-25 Gas Gas MC85 21-25 Complete Crankshaft
CWCKTM8518

Crankworx Husqvarna TC85 18-25 KTM 85SX 18-25 Gas Gas MC85 21-25 Complete Crankshaft

NZ $399.95 NZ $369.95

8% OFF
Crankworx Kawasaki KX250F 04-09 Suzuki RMZ250 04-06 Conrod Kit
CWRKXF2504T

Crankworx Kawasaki KX250F 04-09 Suzuki RMZ250 04-06 Conrod Kit

NZ $199.95 NZ $189.95

5% OFF
Honda CR250 92-01 Bottom End Rebuild Kit
BKCR25092

Honda CR250 92-01 Bottom End Rebuild Kit

NZ $559.80 NZ $508.95

9% OFF
MotoXparts Crank Rebuild Service
CRANK

MotoXparts Crank Rebuild Service

NZ $79.00

NAC Tools Crankcase Splitter
M9538113

NAC Tools Crankcase Splitter

NZ $159.95