Crankworx Yamaha WR250F 15-17 YZ250F 14-16 YZ250FX 15-16 Conrod Kit

SKU: CWRYZF25014


$179.95

or 4 fortnightly payments of $44.99 with

RRP $199.95
SAVE $20.00 (10%)

Flat fee shipping!
Overnight courier just $5
*Conditions Apply

Order before 3.30pm,
we ship today
*Conditions Apply

Yamaha Conrod Kit from Crankworx. Crankworx have taken their manufacturing processes of their high performance Top conrod to the next level in durability & strength 

The Crankworx Top Rod has been designed specifically for use in stock, high modified or big bore engines for the pro racer to the everyday trail rider. When properly installed the Crankworx Top Rod will perform flawlessly in the highest powered engine at the highest level of the sport.

Crankworx Top Rod is a true performance racing conrod - being manufactured from double forgings resulting in the correct grain flow for strength, shotpeen to relive stress, magnafluxed at least twice to check for imperfections and Rockwell tested to validate hardness. Bearings running surfaces are round to 50 millionths and double hone to a mirror finish. Each conrod has a true racers top end with a special aluminium/silicon/bronze bush installed, this extends the conrod, piston and pin life under extreme loads at rpm. (have a look at the other brands and it will be easy see why real racers prefer Crankworx)

Motoxparts can fit and balance this rod to your crank for a low cost - 98% of motorbike crankshafts are rebuildable. Installing a conrod crankshaft rebuild will take the important working areas of the crankshaft back to new specifications. More information about this service can be found in the ;Engine category under Crankshaft & Bearings.

  • Meets/Exceeds genuine
  • Conrod kit includes: Conrod, crankshaft/conrod main big end pin, conrod center big end bearing, thrust washers
  • Manufactured from true forgings resulting in the proper grain flow
  • Each part is double magnafluxed
  • Rockwell tested to validate the correct hardness
  • Conrod is shotpeen to relieve stress
  • Conrod has a bushed end bearing this is made from special aluminium/silicon/bronze material increases piston and pin life
  • All Crankworx conrods are a direct replacement part - Can be used in genuine, Prox, Wiseco, Hot Rods, Crankworx and all other brands of crankshafts.
  • Image is generic and may differ slightly to part supplied.

(CWRYZF25014)

SKU CWRYZF25014
Brand Crankworx
Loading...

Be The First To Review This Product!

Help other MotoXparts users shop smarter by writing reviews for products you have purchased.

Write a product review

Others Also Bought

Yamaha YZ250F 05-07 Stage 3 Engine Rebuild Kit (76.98MM Piston)
EK3YZF2505WOSC

Yamaha YZ250F 05-07 Stage 3 Engine Rebuild Kit (76.98MM Piston)

$974.80 $889.95

9% OFF

More From This Category

Crankworx Kawasaki KX125 03-08 Complete Crankshaft
CWCKX12503

Crankworx Kawasaki KX125 03-08 Complete Crankshaft

$389.95 $359.95

8% OFF
Crankworx Yamaha YZ250 99-23 YZ250X 16-23 Conrod Kit
CWRYZ2503T

Crankworx Yamaha YZ250 99-23 YZ250X 16-23 Conrod Kit

$179.95 $159.95

11% OFF
Hot Rods KTM 85SX 04-23 Husqvarna TC85 14-23 Main Bearings And Seal Kit
M-K048

Hot Rods KTM 85SX 04-23 Husqvarna TC85 14-23 Main Bearings And Seal Kit

$179.95 $169.95

6% OFF
KTM 125SX 16-22 Husqvarna TC125 16-22 Complete Engine Rebuild Kit 'A'  Size 53.94MM Piston
EKKTM12516PROA

KTM 125SX 16-22 Husqvarna TC125 16-22 Complete Engine Rebuild Kit 'A' Size 53.94MM Piston

$879.75 $779.95

11% OFF
KTM 85SX 13-17 Husqvarna TC85 14-17 Bottom End Rebuild Kit
BKKTM8514

KTM 85SX 13-17 Husqvarna TC85 14-17 Bottom End Rebuild Kit

$647.80 $539.95

17% OFF
NRB Suzuki RM/RMX250 89-12 Yamaha YZ250 83-98 Small End Bearing
M26N18X23X22

NRB Suzuki RM/RMX250 89-12 Yamaha YZ250 83-98 Small End Bearing

$14.95