Bike Pedals Escape Neon Orange

SKU: 30200


$138.00

or 4 fortnightly payments of $34.50 with

RRP $167.95
SAVE $29.95 (18%)

Flat fee shipping!
Overnight courier just $5
*Conditions Apply

Order before 3.30pm,
we ship today
*Conditions Apply

Bicycle Pedals Reverse Components Escape Pair Neon Orange Classic Flat Pedal with Anti Rotation with Replaceable Pins The classic flat pedal Through its robustness and its countless colour variations, it is used and appreciated by mountain bikers worldwider. If you look around at your next visit to a European bike park you will certainly discover some ESCAPE pedals! Our in house name for the Escape is "THE Bike Park Pedal" because it is almost impossible to crack the body of the pedal. We often get pedals for service on bearings and axle, where you can see the abuse over the years. Despite countless contacts with stones and roots, the ESCAPE pedal remains sturdy and riders have had years of use of out pairs of these pedals. The combination of steel and aluminium pins, spread over a generous 10 cm by 10 cm pedal body, provides an incredibly good grip, as well as a safe stand on the pedal! Because this fact is just as important as the traction between the wheels and the ground. Replaceable pins, the anti-rotate function" which prevents the pedal from spinning, if you have to get your foot off the pedal in tight switchback manoeuvres, the very fair price-performance ratio and not least huge colour variations contribute to the success of the ESCAPE pedal. Safety note: Unless otherwise specified by the crank manufacturer. Make sure that the pedals are tightened to min. 37 to max. 42 Nm. Features - Pedal size: 100 x 100 mm - Height: 16 mm - Pedal thread: 9/16" - Bearings: 1 x industrial bearing / 1 x IGUS DU bushing - Pin Setup: 16 steel pins (self-threatening) / 8 aluminium pins - Pin height: 5 mm above the pedal - Weight: 405 g (+/- 5% weight tolerance) - Material: Aluminium 6061 Extras: - Anti-rotate-function (the pedal does not rotate arbitrarily with tricks. Desired sluggishness) - All spare parts are available separately - Pedal service at the manufacturer (exchange of all bearings) for 25EUR incl. return shipment within Germany - IGUS DU bushings and sealed industrial bearings - High strength CrMo axle - Pedal washer: to protect the crankset thread

(30200)

This is a generic product which is suitable for many motorbike models.

Please refer to the product description and your manufacturer's instruction manual to determine whether this product is suitable for your bike or not.

SKU 30200
Brand Reverse Components
Loading...

Be The First To Review This Product!

Help other MotoXparts users shop smarter by writing reviews for products you have purchased.

Write a product review

More From This Category

Bike Pump Beto Alloy Combo 100psi
BD-12010

Bike Pump Beto Alloy Combo 100psi

$24.99

On Off Switch Charged Balance Bike
CH-SWITCH

On Off Switch Charged Balance Bike

$4.95

Tubeless Tyre Sealant Bike 16oz/473ml
95-07916

Tubeless Tyre Sealant Bike 16oz/473ml

$34.95

110x20mm Front Hub Boost Endcaps e*thirteen
HBS30-101

110x20mm Front Hub Boost Endcaps e*thirteen

$44.95

15mm Front Hub Endcap Set e*thirteen
HBS20-103

15mm Front Hub Endcap Set e*thirteen

$37.95

4 Up Slyder Ryder Bike Products
RU12321

4 Up Slyder Ryder Bike Products

$65.95